Camluxy Door Alarm Wireless Remote Control Anti-Theft Door And Window Security Alarms Sensor

for Do-It-Yourself Home Security System. Many burglaries occur from break-ins through doors/ windows, especially side, rear and garage doors. This door security devices with 105 dB loud alarm sound can help to deter the intruder, wake or alert you if at home and possibly alert neighbors. The wireless door alarm have 4 modes--- Arm/Disarm/Panic/Doorbell mode controlled by the remote, wireless control range up to 49 ft. Not only a DIY door and window alarm, but also a door open chime/ pool alarm for kids safety or helps notify you if kids/ pets or visitors coming/ going, and emergency alert system for the older/ patients.

Technical Specifications:

An alarm need two AAA alkaline batteries ( not included )
A remote need a 12V/27A alkaline battery ( included )
They can work for at least a year with low-consumption design
Product size: Alarm( 3.35*1.57*0.59 inch), Remote( 2.48*1.18 inch), Magnet box(1.77*0.47 inch)
Package weight: 71 g

Package Including:

1* Door Alarm
1* Magnet Sensor
1* Remote Control
3* Adhesive Tape
1* User Manual

Installation Instruction

There is double-sided adhesive on the Alarm and Magnet box, just peel and stick to doors.

Note:
The 2 parts need be aligned by their alignment arrow.
The Distance between them should be less than 10 mm.

How to use your remote?

Arm Mode: When you press arm button, the alarm will sound "Bi Bi Bi". And 15 seconds later it will sound "Bi" to indicate that the alarm is in arm mode.
Disarm Mode: When you press disarm button once, the arm will sound a long "Bi..." to indicate that the alarm is in disarm mode.
Panic Mode: (for emergencies) When you press panic button, the alarm will alarm 30 seconds immediately. It is effective in any mode.
Doorbell Mode: When you change the alarm to disarm mode and press doorbell button, it will sound "dingdong" to indicate that the alarm is in doorbell mode.

How to pair alarms with your remote?

Change to disarm mode by the remote.
Put one battery into the alarm need be paired at first.
When put the other one into the alarm need be paired, press and hold the doorbell button of the remote.
After you hear a "Bi...", press arm button once.
Then the alarm will sound two "Bi... Bi...".
It is well done.

How to pair remotes with your alarm?

Change to disarm mode by a paired remote.
Take out two batteries of the alarm.
Put one battery into the alarm at first.
When put the other one into it, press and hold the doorbell button of the remote need be paired.
After you hear a "Bi...", press arm button once.
Then the alarm will sound two "Bi... Bi...".
It is well done.

Note: One alarm can only be paired with at most 8 remotes.